RomoCoat FUNGIGUARD ESW 100 Paint
Anti-Fungal Egg Shell White Stoving Finish
RomaCoat FUNGIGUARD ESW 100 is a single-pack, air-drying and stoving type, oleo-resinous alkyd-based anti-fungal protective coating.
It is specially formulated to provide excellent resistance against corrosion, fungal growth, humidity, fresh water, and oil vapours.
The coating forms a smooth egg-shell white finish, making it ideal for applications where clean appearance, hygiene, and durability are essential.
Typical Application
- Finishing coat for steel and stainless steel substrates
- Underbody coating of kitchen sinks
- Commercial kitchen equipment
- HoReCa installations
- Food processing equipment (external / non-food contact areas)
- General-purpose industrial applications exposed to humid and oily environments
Key Properties
- Anti-fungal protection
- Good corrosion resistance
- Smooth egg-shell finish
- Good adhesion on metal surfaces
- Suitable for humid and kitchen environments
- Can be air dried or stove cured
Product Data Sheet
| Property | Details |
|---|---|
| Application Methods | Air Spray, Brush |
| Volume Solids | Approx. 38% |
| Finish | Egg Shell |
| Colour | White (Industrial shades on request) |
| Recommended DFT / Coat | 20–25 microns |
| Theoretical Spreading Rate | 19.0 – 15.2 m²/L at recommended DFT |
| Surface Dry | ~1 hour at 30°C |
| Hard Dry | 24 hours at 30°C |
| Stoving Schedule | 100°C for 15–20 minutes |
| Over coating Interval | Min: 24 hours / Max: No limit |
| Flash Point | Above 23°C |
| Thinner | RP Synthetic Thinner |
Surface preparation
- Surfaces must be clean, dry, and free from oil, grease, dust, rust, and other contaminants
- Recommended: Abrasive blast cleaning to Sa 2½ (Swedish Standard)
- If blasting is not possible, clean using power tools or hand tools to remove loose rust and contaminants
Application Conditions
- Ensure proper ventilation during application and drying
- Avoid application on wet or damp surfaces
- Stir paint thoroughly before use
Health & Safety
- Avoid inhalation of solvent vapours and paint mist
- Avoid contact with skin and eyes
- Use appropriate PPE such as gloves, goggles, and masks
- Provide forced ventilation in confined spaces
- Follow applicable local and national safety regulations
Storage
- Store in a cool, dry, and well-ventilated place
- Keep container tightly closed when not in use
- Protect from direct sunlight and heat sources